Special saw blades for cutting acrylic, solid wood, plexiglass, etc. are absolutely not to be used, because the effect is definitely not good, and it will be damaged quickly, so it is not necessary. Because the special saw blade is originally manufactured according to the cutting characteristics of aluminum alloy metal materials.
Among them, there are other requirements when choosing, which is about the number of teeth, model and so on. After choosing an alloy saw blade, be sure to choose a saw blade with flat teeth, do not choose a ceramic cold saw, a high-speed steel saw blade or something. If you choose the wrong one at the beginning, you will not have good results later.
At the same time, the type of saw blade selected is also very important, mainly including a series of parameters such as the outer diameter, hole diameter, thickness, and number of teeth of the saw blade. These data have a great influence on the cutting effect. If the wrong link is selected, the cutting effect of a certain part will be unsatisfactory.
For example, if the outer diameter of the selected saw blade is too large, the equipment may not be installed; if the outer diameter is too small, the cutting ability will be weakened, and it may be cut continuously at one time. As for the thickness of the saw blade, it is related to the service life. If it is thicker, the loss rate will be reduced, and the service life of the saw blade will be extended accordingly. However, if it is not required for a long time, it is not necessary to choose a particularly thick one.